Showing posts with label Audio Video Baluns. Show all posts
Showing posts with label Audio Video Baluns. Show all posts

Thursday, May 24, 2007

Some more Questions and Answers from Support emails

We occasionally like to post some of the good Support questions we get. Here are some from today.
##################################
Q) Can I use component video cables (Green-Red-Blue) to connect analog to analog (Yellow-Red-White)? If not why not?

A) You cannot convert between Composite video and Component video with a cable, you will need a converter box.
The Red, Green and Blue is Component video.
The Yellow is Composite Video.
The Red and White are analog stereo audio

Component Video uses a bandwidth reduction method to convert RGB to signals called Y, Pr and Pb (analog) or Y- Cr-Cb (digital)
Composite video uses a single RCA or BNC connector with color, brightness and sync in a single connector)

Video Converters

##################################
Q) I've been serching the Net and I am confused. Is there such a beast that will accept component video, s video, and component video, and convert it to HDMI output? If so can I purchase a home theater amplifier which has this switching and conversion internally?

A) Yes, there are video processors that will do this as well as take care of the audio/video switching between A/V sources. Many new Receivers offer some or all of these capabilities as well, but generally at a much lower level of processing quality.
Video Processors


##################################
Q) Hello, I read your DVI-I page and am still a little confused. I have a Radeon X1900 XT video card and would like to buy an LCD display (2560x1600 60hz) to use with it.
According the manufacturer web sites:
The video card has dual link DVI-I.
The display has dual link DVI-D inputs and will come with 2 DVI-D cables.
Will one of the DVI-D cables be sufficient to connect these devices?

A) Yes, one "dual link" cable for one "dual link" capable monitor connected to one "dual link" output from the video card.
The term "dual link" is confusing, it only requires a single cable.

Dual link DVI cables, in case you need a longer, shorter or better one.

##################################
Q) What is the best way to distribute HD video though out the house. Can Cat5 be converted to component video?

A) Cat5 (cat5e or cat6) is the most cost effective way. Fiber optics is great, but costs a lot more, is way harder to repair, and the associated equipment will cost way more. There is also the "Pro" solution - SDI. The cable you need is not too expensive, but the equipment sure is.

Cat5 can be used to distribute Component video and audio using either baluns or proprietary conversion systems.
Audio Authority has a good example of proprietary system:
The AVAtrix Whole-House Routing System

more Distribution from Audio Authority

With the method that uses baluns, you use standard distribution amplifiers, like the Key Digital or Calrad ones:
AV Distribution Amplifiers

along with baluns to convert the audio and video for Cat5 cable runs over long distances:
AV Baluns

Rather than baluns there are other proprietary Cat5 extension solutions such as Gefen's:
Gefen Home Theater Distribution
These are great when you want the latest or best technologies such as HDMI.
##################################

Well, that's it for today. We wish everyone a great holiday!

Tuesday, August 22, 2006

How do the audio/Video over CAT5 Baluns work?

Q) How do the audio/Video over CAT5 Baluns work? Do these allow me to run audio/video over an Ethernet Network? Does the Audio/Video pass through network Hubs, Routers, Switches etc?

A) The A/V signals are not converted to Ethernet, they are converted to "balanced" audio or video signals
for transmission over twisted pair wiring. The cables should be dedicated to A/V signals, and should NOT be connected to your Ethernet network, Ethernet hubs, routers, etc. Here are the basics:
The Balun converts the audio or video signal into a "balanced" audio or video signal which will allow any picked up noise to be canceled out at the receiving balun. It is very important that the "halves" of a balanced run be as similar as possible in length and other attributes. Otherwise the ability to cancel out noise is effected. Using CAT6 or high quality CAT5e cable with tight tolerances will give the best possible results.
Each CAT5 balanced signal run has to be separate - you can't do splices or "Y" cables with balanced signals.You have to split the signals with distribution amplifiers before the baluns, which means you would need a separate balun for each and every sent and received audio/video signal. There are some baluns that combine audio and video or multiple separate video components (like separate RGB signals or Y-Pr-Pb) into one box, but these boxes actually contain multiple baluns in one box and will require more and more twisted pairs to be used within the CAT5 cable. If more signals are needed than there are twisted pairs in a CAT5 cable, then multiple CAT5 cables would be necessary.